Setting General Parameters

Administrators can control a variety of Accolade behavior through the system parameters available in the Administration Console. Some parameters are available to be set directly within Accolade (Administration > System Settings > Parameters) After changing a parameter within the Parameters page in Accolade, you must recycle the application pool on the Accolade website to apply the change. However, if you change a parameter using the Administration Console, this step is performed automatically.

See Accolade Parameters for a list of available system parameters.

To define parameters in the Accolade Administration Console:

1. Log in to the Accolade application server.
2. From the Windows Start menu, display all projects and select Sopheon Accolade Administration Console.
3. From the Navigation list, select Standard Parameters.
4. (Optional) To narrow the list of displayed parameters, select a category.
5. (Optional) Select Show Advanced to include advanced parameters in the list.

Important! Advanced parameters are more likely to have adverse effects on your system if you make an error. Sopheon recommends that you not modify advanced parameters unless you have expert knowledge of Accolade. Parameters marked Read Only in the description are included with the advanced parameters but cannot be modified in the console.

6. Click in the Value column to set the value for a parameter.
7. Click Apply to save your changes before navigating to a section of the console.

If you navigate away without clicking Apply, your changes are lost.

Notes:    Process Designers have access to change some parameters within Accolade in the Administration > System Settings > Parameters.